Understanding CNC Machining Service Blog
17/11/2026
Specifying Type III hard anodize? See realistic thickness and hardness, how much parts grow, which alloys...
16/11/2026
Drawings still citing MIL-C-5541 Class 3 are common. See how the superseded callout maps to MIL-DTL-5541...
05/11/2026
A completed 3 mm micro needle project with 0.2 to 0.3 mm features: real photographs, a scale comparison...
05/11/2026
A masked alloy steel deep-hole case: bore control, chip evacuation, tool guidance and inspection planning...
13/10/2026
How Nadcap AC7108 audit criteria map to anodizing and conversion coating, what auditors check, and how...
13/10/2026
What ASTM B117 controls, typical salt spray hours by finish, how creepage is rated under ASTM D1654,...
13/10/2026
How laser marking interacts with Type II and Type III anodic films: contrast by finish, mark depth limits,...
13/10/2026
Tolerance, cost crossover and finishing limits compared for sheet metal fabrication and CNC machining,...
13/10/2026
Glass-filled nylon wears tool steel regardless of hardness: how a hydrogenated DLC film changes the wear...
13/10/2026
A Ti-6Al-4V bracket with 0.9 mm ribs and ±0.02 mm intersecting bores: how the three-stage process plan,...
25/08/2026
Complete guide to CNC machining costs in 2026. Learn how material, complexity, tolerance & quantity...
No posts found